product
ARALUBE TERULAN CX 201
- Description :
Terulan CX 201 is an excellent oi-based, medium term (1~6 months) rust preventatives.Because of its unique water displacing properties, a continuous rust inhibiting film covers the metal to be protected. After the part was treated, it will have a thin layer film that is not easily noticed. This line of Product will not offer as good corrosion protection as Terulan CX 204, but it is better suited thin gauge steel and used as a cleaner for lightly soil part.
It is recommended to use as is, without dilution. Can be dipped, sprayed or brushed. Where possible, dip application with agitation, and sufficient contact time produces best results. The curing rate depends depending on the environment condition.
|
Aralube Terulan |
Unit |
CX 201 |
CX204 |
Analysis Basis |
|
Viscosity @20°C |
mm2 /s |
2,8 |
4,6 |
DIN 5156 |
|
|
||||
|
Density @15°C |
g/ml |
0,807 |
0,832 |
DIN 51757 |
|
Flash point |
°C |
42 |
55 |
DIN ISO 2592 |
|
Corrosiom Test ( Humidity) |
pass |
pass |
|
DIN 50017 |
|
Salt Spray Corrossion Test |
|
48 |
192 |
DIN 50907 |
|
Coverage (Approx) |
m2/ Litre |
94,0 |
85,0 |
- |
|
Oil Film Thickness |
|
2,90 |
4,80 |
- |
Pail: 18 litre
Drum: 200 litre
Terulan CX 201 is an excellent oi-based, medium term (1~6 months) rust preventatives.Because of its unique water displacing properties, a continuous rust inhibiting film covers the metal to be protected. After the part was treated, it will have a thin layer film that is not easily noticed. This line of Product will not offer as good corrosion protection as Terulan CX 204, but it is better suited thin gauge steel and used as a cleaner for lightly soil part.
It is recommended to use as is, without dilution. Can be dipped, sprayed or brushed. Where possible, dip application with agitation, and sufficient contact time produces best results. The curing rate depends depending on the environment condition.
The Terulan CX 201 line series is petroleum based rust preventive product primarily for industrial application. There products are non-drying, which leaves a layer of soft-coated film to cover wide range of corrosion protection required for different strorage codition and ease of application and cleaning.